Harley-Davidson Accessories Oils & Chemicals

Quick Wash is a spray-and-rinse cleaner for dirt, oil and insects, including awkward spaces that are difficult to reach by hand. H-D describes its sheeting action as helping water rinse away cleanly and prevent spotting. The film presents a quick cleaning process, but also shows that caked-on dirt or insects may need a microfibre towel or wash mitt to loosen them. It is not a promise that every bike will become clean without any wiping.

In the demonstrated process, let the motorcycle cool and pre-rinse with water because the cleaner is water activated. Spray on Quick Wash, allow it to act for at least one minute, then hose it off; use the towel or mitt if needed for stubborn dirt. The current international listing also specifies spraying, waiting one minute and rinsing. Follow the current bottle directions for the actual surface and conditions, while retaining the film’s cooled-bike and pre-rinse context.

The international product matched here is 93600171 in a 650 ml trigger bottle; the source film’s US reference is 93600162. H-D states that the formula does not strip wax, corrode fasteners or spokes, or stain leather and vinyl seats and saddlebags. The film also names chrome, painted finishes and rubber among the applications. These are manufacturer compatibility claims for use as directed, not an unconditional guarantee for every coating, contamination or cleaning method.

Everyday Detailer is intended for light cleaning between waxes, at home or while travelling. The non-abrasive formula cleans and brightens the finish without a full wash. The current 93600158 listing names paint, clear coat, chrome, glass, windshields, wheels, vinyl and plastic as suitable surfaces. It comes in a 650 ml trigger bottle. The film additionally mentions powder coat, but that is not established by the current named surface list; use the bottle’s directions for your particular finish.

There is an application difference to be aware of when watching: the film says wet or dry surfaces, while the current product listing specifies clean, dry surfaces. Follow the current directions for the bottle you buy. That listing describes spraying on and buffing off with a clean, dry microfibre towel. The film also says the product preserves glaze or polymer sealant; that film-only compatibility statement should not override the instructions for an existing coating.

H-D’s current listing states that the product provides UV protection against fading, is biodegradable and contains no waxes, oils or hydrocarbon solvents. The film goes further by describing 90 days of UV protection and no silicones. Those additional claims are not confirmed for the current bottle by the supplied product evidence, so this explanation does not promise a 90-day protection period or a silicone-free current formulation. The general UV benefit is supported separately from those unresolved details.

Scratch & Swirl Repair is for fine scratches and swirl marks in gloss paint, such as the marks that can result from a dirty cloth or unsuitable brush. The film explains how its non-rigid abrasives initially level the clear coat, then become less aggressive during buffing to leave a polished finish. The demonstration is a product example, not a promise to repair deep scratches, missing paint or every defect to the same result.

The matched international product is 93600156, supplied in a 236 ml bottle; the film’s US reference is 93600155. Its formula is described as biodegradable. The current listing adds the application detail: work on a clean, cooled motorcycle, apply with a clean microfibre using firm circular movements, allow a light haze to form for one to two minutes, then buff with a separate clean microfibre. These are the product directions, rather than extra steps narrated in the film.

The listing specifically excludes clear-coated, powder-coated or painted wheels. That wheel restriction is not a ban on treating clear coat over gloss body paint, which is the intended use discussed in the film. Check the finish and current bottle instructions before use. This explanation and its product link cover Scratch & Swirl Repair; any separate finishing or protective treatment remains a separate choice.

Seat, Saddlebag & Trim Cleaner is a one-step treatment for vinyl, leather and plastic, including seats, saddlebags, inner fairings and dash panels. H-D describes it as cleaning and refreshing the surface without the greasy residue that can attract more dirt. The current international listing confirms that it contains no waxes or other solvents that can dull vinyl and plastic. Those named uses do not establish that the cleaner is suitable for every material or finish.

Apply the gel to the surface with a microfibre applicator, then buff away accumulated dust and grime with a microfibre cloth. The film describes quick drying to a satin finish, and the current listing confirms the satin result. The matched international reference is 93600170 in a 236 ml bottle; the source film identifies the US version 93600167. Although the film also describes a non-slip finish and immediate secure seating, that safety assurance is not independently established for the current international product. Follow its bottle directions and assess the treated surface before riding; the satin appearance alone does not establish grip or immediate readiness.