Harley-Davidson TRIKE TRI GLIDE ULTRA Mounting Hardware

Drag Specialties

Solenoid Body Cover for Big Twin<br><ul><li>Chrome-plated steel</li><li>Includes mounting hardware</li></ul>

Drag Specialties

Precision Tourbox<br><ul><li>Direct bolt-on replacement for the OEM tourbox</li><li>Great for repair jobs or as an additional accessory to give your bike a new look</li><li>Manufactured from OEM-grade materials with precision tooling</li><li>Mounting holes for brackets, latches, hinges, reinforcing plate side trim and side are pre-drilled</li><li>Mounting holes for corner lights, grommets and speaker pods are clearly marked(drilling is required)</li><li>Rear portion of the tourbox also has cut-outs marked for installation of corner lights and housing (cutting/sawing required)</li><li>Accepts OEM and aftermarket mounting hardware, reinforcing plate, liner and accessories</li><li>Smooth finish requires minimal prep before painting</li><li>Includes detailed instructions</li><li>Matching tourbox lid is available separately</li><li>Will fit 97-05 models if early mounting plate is used as well as late-style side lights/trim</li><li>Acrylonitrile Butadiene Styrene -ABS- Plastic</li></ul>

Drag Specialties

Electric Horn Kit<br><ul><li>12 V, 110 dB signal</li><li>Kit includes:</li><li>Horn (OEM #69060-90F)</li><li>Cover (OEM #69012-93A)</li><li>Mounting bracket (OEM #69120-91)</li><li>Rubber mount (OEM #69123-92) </li><li>Mounting hardware</li></ul>

S&S

Pinion Gear for Two-Gear Driven Cams<br><ul><li>A two-gear set is required for gear-driven cams that do not come with secondary cam gears; be sure to select the appropriate outer cam drive gear, pinion drive gear, and mounting hardware</li><li>Due to the inherent characteristics of gear drives, you may experience more valve train noise with gear driven cams; oversized and undersized pinion gears are available to help achieve correct gear lash (sold separately)</li><li>Drive gear and pinion gears must be purchased separately</li><li>Made in the USA</li><li>It is the installer's responsibility to check all clearances and follow all procedures in the S&amp;S instructions and Harley-Davidson manual.</li></ul><br>This is a Pinion gear only- matching drive gear must be purchased separately.

Drag Specialties

EZ-ON Mount Low-Profile Solo Seat<br><ul><li>3/16" ABS thermoformed seat base with carpeted bottom to protect paint</li><li>Lower position creates better rider position with improved styling</li><li>Flexible urethane foam for maximum comfort</li><li>EZ-On Mount System Included</li><li>Include mounting hardware</li><li>Made in the USA</li><li>EU: Solar-reflective leather in the seating area; patented process reduces surface temperature by as much as -3,89 °C for a cooler seat, higher durability and longer life over conventional leather or vinyl</li><li>EU: 4,76 mm ABS thermoformed seat base with carpeted bottom to protect paint</li></ul><br>Not solar-reflective leather. Does not fit '23 FLHXSE/FLTRXSE.

Pingel

Fairing Mirror Drop Bracket Kit<br><ul><li>Provide the same clear image with the OEM mirrors as compared to the shaky-blurred image when using handlebar-mounted mirrors</li><li>Unique design drops the OEM fairing mount mirrors for that cool Bagger look on models with tall bars</li><li>Mounting hardware and instructions included</li><li>Billet aluminum with a black finish</li><li>Made in the USA</li><li>Designed specifically for FLHX models, but will also fit FLHT models by drilling small holes in the inner fairing.</li><li>Not for use with stock handlebars; rider will not see past arms.</li></ul>

Thrashin Supply Co.

Hole Shot Risers<br><ul><li>Billet 6061 aluminum</li><li>Drilled with 1/2" hole for internal wiring</li><li>Works with any standard 1" handlebar</li><li>Sold in pairs with top clamp and 5/16-18 x 7/8" hardware</li><li>Base hole tapped for standard 1/2-13 mounting bolts (bolts not included)</li><li>Fits on all models with 3-1/2" center-on-center riser spacing, including most OE Harley-Davidsons</li><li>Made in the USA</li></ul>