Harley-Davidson TOURING ROAD GLIDE ULTRA Installation Hardware

Drag Specialties

Precision Tourbox<br><ul><li>Direct bolt-on replacement for the OEM tourbox</li><li>Great for repair jobs or as an additional accessory to give your bike a new look</li><li>Manufactured from OEM-grade materials with precision tooling</li><li>Mounting holes for brackets, latches, hinges, reinforcing plate side trim and side are pre-drilled</li><li>Mounting holes for corner lights, grommets and speaker pods are clearly marked(drilling is required)</li><li>Rear portion of the tourbox also has cut-outs marked for installation of corner lights and housing (cutting/sawing required)</li><li>Accepts OEM and aftermarket mounting hardware, reinforcing plate, liner and accessories</li><li>Smooth finish requires minimal prep before painting</li><li>Includes detailed instructions</li><li>Matching tourbox lid is available separately</li><li>Will fit 97-05 models if early mounting plate is used as well as late-style side lights/trim</li><li>Acrylonitrile Butadiene Styrene -ABS- Plastic</li></ul>

Kuryakyn

Windshield Side Trim<br><ul><li>Enhances transition from windshield to fairing on Road Glide models</li><li>Made from lightweight injection-molded ABS</li><li>Installation of the gloss black trim pieces reuses OEM hardware while the chrome versions come with stainless steel replacement screws</li></ul><br>Stainless steel replacement screws.

Arlen Ness

Pro Short Front Fender<br><ul><li>Features performance inspired short front fender</li><li>Stamped from one piece of 14-gauge steel that minimize bodywork</li><li>Direct bolt-on design</li><li>5.9" wide fenders allow clearance for up to a 14” oversized rotors</li><li>Includes gloss black anodized billet brackets and necessary installation hardware</li><li>Made in the USA</li></ul><br>Accepts 120/70-21 tire.

S&S

Big Bore Cylinder Kit<br><ul><li>Bolt-on without requiring machining of the crankcase</li><li>Original engine serial numbers are retained</li><li>MLS (multi-layered steel) head gaskets</li><li>Retains stock engine height</li><li>Includes cam cover badge</li><li>All necessary gaskets and hardware required for installation is included</li><li>Made in the USA</li></ul>

S&S

128" Power Package Engine Performance Kit<br><ul><li>Big-bore bolt-on kit increases 114"/117" with 4-1/2" stroke M-Eight with no case machining required</li><li>4-1/4" bore cylinders with 11:1 forged pistons</li><li>S&amp;S oil pump/cam plate with blue anodized finish</li><li>Passage plugs are removable for servicing</li><li>Independent scavenge sections for flywheel cavity and cam chest</li><li>Debris screen in both scavenge pickups</li><li>Magnet in cam chest to help prevent debris from entering the oil pump</li><li>Increased oil flow capacity on both the oil feed and scavenge side</li><li>Adjustable pressure relief valve can be adjusted with the unit installed in the engine</li><li>Quickee pushrods with chrome pushrod tubes</li><li>S&amp;S premium tappets</li><li>S&amp;S hard-anodized, black coated tappet cuffs are billet aluminum construction</li><li>Improve tappet stability in high-lift, high-rpm situations</li><li>S&amp;S 550 cams designed for big bore applications</li><li>S&amp;S valve springs work with cams up to .605" lift</li><li>High-performance conical single-wire spring design</li><li>All necessary gaskets, bearings, and hardware for bolt-on installation is included</li><li>Made in the U.S.A.</li></ul><br>Not recommended for Tri-Glide or other three wheel models including conversion due to lugging nature of these bikes.