Harley-Davidson Fat Boy Gray Ghost Hand Grips

The Carbide Collection uses forged billet aluminium with either bright chrome or black anodising and machined highlights. Its slashed detailing carries through the rider and passenger foot supports, hand controls and smaller trim pieces. Black rubber contact surfaces on the boards and pegs are intended to give a positive grip. These are separately chosen accessories: the film’s complete collection is not one kit, and the products linked below are the members matched to this category.

For passengers, the film compares footboards with footpegs, alongside matching rider footboards. The passenger-board variants matter: 50503325 and 50503326 require the listed passenger-footboard support and explicitly exclude Trikes. The 2026-on Trike passenger boards are 50503327 and 50503328. A similar appearance does not make those versions interchangeable.

For a stretched-out riding position, the film pairs highway pegs with separate engine-guard mounts. Mounts 50503333 in black and 50503334 in chrome are supplied as a pair with necessary mounting hardware, for the specified 2024-on models with 1.25-inch engine guards. The footpegs are sold separately. Choose both the correct mount and the appropriate pegs rather than assuming the pictured assembly is included in either listing.

The separate Carbide heated grips have high, medium and low settings with thermostatic control to maintain the selected temperature. A flexible PCB heating element distributes heat, with independent temperature sensing and control for the left and right grips. Settings are controlled by the left-grip button or touchscreen and indicated on the motorcycle display. The grips are sold as a pair. Their exact fitment excludes FXBB and FXBR, so seeing this collection on a Breakout footboard page does not make its heated grips suitable for that bike. Some 2024 Street Glide and Road Glide installations may need a dealer Digital Technician update.

A matching brake-pedal pad and shifter peg complete the control-area treatment, both with rubber contact surfaces. Heating belongs to the heated grips, and included mounting hardware depends on the specific item. Use the category’s actual product links to choose the relevant accessory and check its finish, motorcycle and fitting requirements before combining pieces.

Redline brings together precision-machined, forged aluminium pieces in red, blue and black anodised finishes. Those colours describe the collection; each linked product has its own finish and fitment. The rider, passenger and highway pegs and rider footboards have open shapes, raised edges and cleats that H-D describes as gripping boot soles. Optional black rubber Comfort Inserts change their look and feel: 50503139 fits Redline rider footboards, while 50503140 fits Redline rider, passenger or highway pegs. Both insert sets are separate purchases, supplied as pairs, with retaining tabs rather than fitting tools or fasteners.

The hand grips use an anodised aluminium body with rubber contact surfaces. Their glueless design allows removal for servicing without damage, according to the exact listing; that feature belongs to the grips rather than the decorative covers. The brake-pedal pads come in small and large versions with a forged aluminium body and black rubber centre. The matching shifter peg adds tapered ends and a machined bevel, so the controls carry the same design without being interchangeable parts.

The derby cover, timer cover and fuel cap use curved machined spokes with a central Bar & Shield motif. These are appearance details, not engine-performance upgrades. The film shows the collection together, while the links here identify the actual pieces in this category. Choose the correct part, size and finish for the bike, and check any required mounts or separate inserts; a shared Redline name does not establish common fitment or included accessories.

This film presents the black anodised Switchback Collection. Forged billet aluminium, pronounced knurling and rubber contact surfaces give the controls and foot supports their textured character. H-D describes the pieces as lightweight additions, without quoting a weight saving. The black anodising protects the exposed aluminium, while the knurled and rubber areas are intended to provide a secure-feeling contact surface. Those contact features do not belong to every decorative cover.

The collection includes regular hand grips and a separate heated-grip option, rider and passenger footpegs, footboards, mirrors, brake-pedal pads, shifter pegs, derby covers and timer covers. They share a visual treatment, but not one fitment or function. In particular, regular grips 56100564 and heated grips 56100574 have model restrictions including FXBB and FXBR exclusions; a Switchback film on a Breakout trim category does not override those restrictions.

Check the exact member’s fitting parts as well as its finish. Rider footboards 50502476 reuse the original hardware, which is not supplied with them. Mirrors 56000343 include the left and right mirrors and mounting hardware, but some motorcycles need the specified fairing plugs. The actual products in this category are linked below. The black-collection film does not establish the finish or suitability of clear-anodised or other same-name variants.

The clear-anodised Switchback film shows the bright alternative to the black collection. Forged billet aluminium, pronounced knurling and rubber contact surfaces give the hand and foot controls a deliberately textured finish. Harley-Davidson describes these as lightweight additions, without specifying a weight saving. Clear anodising protects the bright aluminium on the controls; the matching derby and timer covers combine black anodised areas with exposed-looking aluminium details. Rubber and knurling provide grip where hands or boots meet the controls, rather than being a feature of every decorative cover.

The film moves through regular and heated hand grips, rider and passenger footpegs, footboards, mirrors, brake-pedal pads, shifter pegs, derby covers and timer covers. These are individual accessories sharing a design, not one complete kit or one universal fitment. Regular grips 56100565 and heated grips 56100575 are distinct products. The current heated-grip specification adds three thermostatically controlled heat settings, a flexible heating element and independent temperature sensing for the two grips; operation uses the supported motorcycle controls and display. A regular grip does not supply those heating functions.

The mounting details also differ. Rider footboards 50502483 require the original mounting hardware to be reused; hardware is not included. Mini footboard and mount kit 50502669 includes its required mounting kit. Mirrors 56000344 supply a left/right pair with mounting hardware. Choose the exact part offered for your selected bike and category, and check its installation requirements before ordering. The film’s performance language is a styling and product presentation, not a measured power, weight or handling improvement.

The Adversary Heated Hand Grips shown here add hand warmth for cool mornings and cold nights with a distinct black-and-orange finish. Part 56100619 is sold as a pair. Rubber provides a positive grip while riding, framed by the durable dual-anodised black finish and orange highlights seen in the close-ups.

The grips offer high, medium and low heat settings. Thermostatic control maintains the selected temperature during the ride, while a flexible PCB heating element distributes the heat evenly. The left and right grips have independent temperature sensing and control. Adjust the setting with the button on the left grip or the touchscreen; the motorcycle’s display indicates the chosen setting.

The film shows both the grip texture and the left-hand control button, making the appearance and operating method clear. Additional Adversary accessories can continue the same custom style, but they are separate from this grip pair. Use the exact product action and confirm compatibility with the selected motorcycle before buying; a shared collection name alone does not establish fitment.

Kahuna Heated Hand Grips combine warmth for cool mornings and cold evening rides with the collection’s custom appearance. The film shows the rich black rubber grip surface, its traction pattern and the red Bar & Shield logo. The current sets are supplied as a pair, in gloss black under part 56100713 or chrome under part 56100714.

The grips offer high, medium and low heat settings. Thermostatic control maintains the selected temperature during the ride, while a flexible PCB heating element distributes the heat evenly. The left and right grips have independent temperature sensing and control. Adjust the setting with the button on the left grip or the touchscreen; the motorcycle’s display indicates the chosen setting.

Close-ups show how the rubber and metal finish work together around the hand controls. Harley-Davidson suggests matching the grips with Kahuna engine trim to extend the look; those additional accessories are separate purchases. Choose the exact finish below and check the selected motorcycle’s application on the product page. The film describes the controls and heating features rather than giving an installation procedure.